Difference between revisions of "Streaming/en"

From Ace Stream Wiki
Jump to: navigation, search
(Launching broadcast)
(Transition from versions 2.0.х to version 2.1 and higher)
 
(25 intermediate revisions by 3 users not shown)
Line 1: Line 1:
== Installation ==
 
 
=== Installing ACE Stream on Debian/Ubuntu from repository ===
 
 
'''Step 1'''
 
 
Add link on appropriate repository into <tt>/etc/apt/sources.list</tt> file.
 
 
Repository should be selected according to operating system.
 
 
''Debian 6+:''
 
<tt><nowiki>deb http://repo.acestream.org/debian/ squeeze main</nowiki></tt>
 
or
 
<tt><nowiki>deb http://repo.acestream.org/debian/ sid main</nowiki></tt>
 
 
Note: packages in sid repository are assembled with dependencies that correspond to official sid-repositories of Debian.
 
If you don't know, which repository to choose, use squeeze.
 
 
''Ubuntu 11.10:''
 
<tt><nowiki>deb http://repo.acestream.org/ubuntu/ oneiric main</nowiki></tt>
 
 
''Ubuntu 12.04:''
 
<tt><nowiki>deb http://repo.acestream.org/ubuntu/ precise main</nowiki></tt>
 
 
''Ubuntu 12.10:''
 
<tt><nowiki>deb http://repo.acestream.org/ubuntu/ quantal main</nowiki></tt>
 
 
'''Step 2'''
 
 
Installing public key. To do this you have to run the following command:
 
 
''Debian:''
 
<tt><nowiki>wget -O - http://repo.acestream.org/keys/acestream.public.key | apt-key add -</nowiki></tt>
 
 
''Ubuntu:''
 
<tt><nowiki>sudo wget -O - http://repo.acestream.org/keys/acestream.public.key | sudo apt-key add -</nowiki></tt>
 
 
'''Step 3'''
 
 
Installing the right package. For example, for engine installation you have to install acestream-engine package.
 
 
''Debian''
 
<tt>apt-get update</tt>
 
<tt>apt-get install acestream-engine</tt>
 
 
''Ubuntu''
 
<tt>sudo apt-get update</tt>
 
<tt>sudo apt-get install acestream-engine</tt>
 
 
The following packages are available in the repository for Ubuntu:
 
*'''acestream-engine''' - engine
 
*'''acestream-mozilla-plugin''' - plug-in for browser
 
*'''acestream-player''' - desktop player
 
*'''acestream-player-data''' - set of common libraries for the player and plug-in
 
*'''acestream-full''' - full package, including all of the above
 
 
For Debian only the engine (acestream-engine) is available.
 
 
=== Installing ACE Stream package on Ubuntu from deb-package ===
 
You can install ACE Stream on Ubuntu without using repository. To do this you need to download the installation package by one of links below and install it using a package manager (for example, by double click on downloaded package).
 
 
Package for 32-bit versions of Ubuntu:
 
<tt>http://dl.torrentstream.org/products/acestream-full/ubuntu/i368/latest</tt>
 
 
Package for 64-bit versions of Ubuntu:
 
<tt>http://dl.torrentstream.org/products/acestream-full/ubuntu/amd64/latest</tt>
 
 
Supported versions of Ubuntu: 11.10, 12.04, 12.10
 
 
This intallation package is an analog of <tt>acestream-full</tt> package from repository. It includes the engine, player and plug-in for browsers.
 
 
 
==Launching broadcast==
 
==Launching broadcast==
  
Line 77: Line 6:
 
*'''Client''' - ACE Stream software, which is used to play broadcast.
 
*'''Client''' - ACE Stream software, which is used to play broadcast.
  
===Переход с версий 2.0.х на версию 2.1 и выше===
+
===Transition from versions 2.0.х to version 2.1 and higher===
С 10 сентября 2013 года доступна обновленная версия движка 2.1.6 под Ubuntu, Debian и CentOS.
+
From September, 10, 2013, upgraded version of the engine (2.1.6) for Ubuntu, Debian and CentOS is available.
 +
Before using a new version for production, we recommend to test it on one or several broadcasts, if possible.
 +
If you face any problems, please, write to the forum (https://forum.acestream.media/latest) or email 'support@acestream.net'.
  
Новая версия доступна для тестирования по следующим ссылкам:
+
<span style="color: #900;">ATTENTION!</span> In the nearest future support for older versions will be stopped.
  
'''Ubuntu''':
+
<span style="color: #009;">IMPORTANT!</span> All broadcasts created via new version of Ace Stream (2.1 and higher) are not suppported by client software of old versions (2.0.х and lower). If you attempt to watch a new broadcast using the old engine, an error "Cannot load transport file" will appear.
* http://dl.acestream.org/ubuntu/acestream-engine_2.1.6-1oneiric1_amd64.deb
 
* http://dl.acestream.org/ubuntu/acestream-engine_2.1.6-1oneiric1_i386.deb
 
* http://dl.acestream.org/ubuntu/acestream-engine_2.1.6-1precise1_amd64.deb
 
* http://dl.acestream.org/ubuntu/acestream-engine_2.1.6-1precise1_i386.deb
 
* http://dl.acestream.org/ubuntu/acestream-engine_2.1.6-1quantal1_amd64.deb
 
* http://dl.acestream.org/ubuntu/acestream-engine_2.1.6-1quantal1_i386.deb
 
* http://dl.acestream.org/ubuntu/acestream-engine_2.1.6-1raring1_amd64.deb
 
* http://dl.acestream.org/ubuntu/acestream-engine_2.1.6-1raring1_i386.deb
 
  
'''Debian''':
+
====Changes in launch parameters====
* http://dl.acestream.org/debian/acestream-engine_2.1.6-1squeeze1_amd64.deb
+
Some parameters of the launch of sources and support nodes from the command line have been changed, therefore the launch with the old command line will not work.
* http://dl.acestream.org/debian/acestream-engine_2.1.6-1wheezy1_amd64.deb
 
* http://dl.acestream.org/debian/acestream-engine_2.1.6-1wheezy1_i386.deb
 
  
'''CentOS 6''':
+
Main changes:
* http://dl.acestream.org/centos/6/acestream-engine-2.1.6_1-centos6-x86_64.tar.gz
+
* one executable file is used <tt>acestreamengine</tt>; different launch modes (a source, support node) are set by options:
 +
** instead of <tt>acestreamengine-stream</tt> you should launch <tt>acestreamengine --stream-source</tt>
 +
** instead of <tt>acestreamengine-node</tt> you should launch <tt>acestreamengine --stream-node</tt>
 +
** instead of <tt>acestreamengine-client-console</tt> you should launch <tt>acestreamengine --client-console</tt>
 +
** instead of <tt>acestreamengine-client-gtk</tt> you should launch <tt>acestreamengine --client-gtk</tt>
 +
* log system is changed. In old versions the engine output all debug information into STDERR and redirecting the output was required to write logs into a file. In a new version it is possible to define in options, where to write logs - into STDOUT, into STDERR, into a file or syslog. Rotation of logs by their size is supported for files. You can read description of all options in [[#acestreamengine command|acestreamengine command]]
  
В репозитории repo.acestream.net пока доступны старые версии (2.0.8).
+
===Transition from versions 2.1.х to version 3.0.x and higher===
 +
See main article about Ace Stream v.3 - https://wiki.acestream.media/AceStream_3.0/en
  
Перед полномасштабным использованием новой версии мы рекомендуем по возможности протестировать ее на одной или нескольких трансляциях.
+
===acestreamengine command===
 +
Starting from version 2.1 Ace Stream Engine for Linux represents a single executable file <tt>acestreamengine</tt>, which works in different modes, depending on specified parameters.
  
При возникновении каких-либо проблем просьба писать на форум http://forum.torrentstream.org либо на почту support@acestream.net.
+
Work mode is set by one of the following parameters:
 +
* <tt>--client-console</tt> - launch engine in a client mode from console (without a graphic interface)
 +
* <tt>--client-wx</tt> - launch engine in a client mode with a graphic interface WX
 +
* <tt>--client-gtk</tt> - launch engine in a client mode with a graphic interface GTK
 +
* <tt>--stream-source</tt> - launch a source of broadcast
 +
* <tt>--stream-node</tt> - launch a support node
 +
* <tt>--create-transport</tt> - create a transport file from existing content (VOD)
 +
* <tt>--create-transport-multi</tt> - create a multi-stream transport file
 +
* <tt>--version</tt> - show engine version
  
Старые версии временно доступны в репозитории и по прямым ссылкам:
+
Each work mode has their own required and not required parameters, described in appropriate sections.
  
'''Ubuntu''':
+
Also all work modes have common parameters that manage the output of debug information.
* http://dl.acestream.org/ubuntu/acestream-engine_2.0.8-1oneiric6_amd64.deb
+
* <tt>--log-stdout</tt> - deduce information in STDOUT
* http://dl.acestream.org/ubuntu/acestream-engine_2.0.8-1oneiric6_i386.deb
+
* <tt>--log-stderr</tt> - deduce information in STDERR
* http://dl.acestream.org/ubuntu/acestream-engine_2.0.8-1precise6_amd64.deb
+
* <tt>--log-file PATH</tt> - deduce information in a specified file
* http://dl.acestream.org/ubuntu/acestream-engine_2.0.8-1precise6_i386.deb
+
* <tt>--log-max-size SIZE</tt> - maximum file size (bytes)
* http://dl.acestream.org/ubuntu/acestream-engine_2.0.8-1quantal6_amd64.deb
+
* <tt>--log-backup-count COUNT</tt> - how many backup logs have to be stored (backup log file is created when a limit, specified by a parameter --log-max-size, is reached)
* http://dl.acestream.org/ubuntu/acestream-engine_2.0.8-1quantal6_i386.deb
+
* <tt>--log-file-buffer SIZE</tt> - enable buffering of output into the file (using buffer of specified size in bytes)
* http://dl.acestream.org/ubuntu/acestream-engine_2.0.8-1raring6_amd64.deb
+
* <tt>--log-syslog HOST</tt> - deduce information in syslog-server at the specified address
* http://dl.acestream.org/ubuntu/acestream-engine_2.0.8-1raring6_i386.deb
+
* <tt>--log-syslog-port PORT</tt> - syslog-server port
 
+
* <tt>--log-syslog-facility FACILITY</tt> - used facility
'''Debian''':
+
* <tt>--log-syslog-buffer SIZE</tt> - enable buffering of output into syslog (using buffer of specified size in bytes)
* http://dl.acestream.org/debian/acestream-engine_2.0.8-1sid5_amd64.deb
 
* http://dl.acestream.org/debian/acestream-engine_2.0.8-1sid5_i386.deb
 
* http://dl.acestream.org/debian/acestream-engine_2.0.8-1squeeze5_amd64.deb
 
* http://dl.acestream.org/debian/acestream-engine_2.0.8-1squeeze5_i386.deb
 
 
 
'''CentOS 6''':
 
* http://dl.acestream.org/centos/6/acestream-engine-2.0.8_7-centos6-x86_64.tar.gz
 
 
 
<span style="color: #900;">ВНИМАНИЕ!</span> В ближайшее время поддержка старых версий будет прекращена.
 
 
 
<span style="color: #009;">ВАЖНО!</span> Все трансляции, созданные с помощью новой версии Ace Stream (2.1 и выше) не поддерживаются клиентским ПО старых версий (2.0.х и ниже). При попытке просмотреть новую трансляцию с помощью старого движка будет выдаваться ошибка "Cannot load transport file"
 
 
 
====Изменения в параметрах запуска====
 
В новой версии изменились некоторые параметры запуска источников и узлов поддержки из командной строки, поэтому запуск со старой командной строкой работать не будет.
 
 
 
Основные изменения:
 
* используется один исполняемый файл <tt>acestreamengine</tt>; различные режимы запуска (источник, узел поддержки) задаются опциями:
 
** вместо <tt>acestreamengine-stream</tt> следует запускать <tt>acestreamengine --stream-source</tt>
 
** вместо <tt>acestreamengine-node</tt> следует запускать <tt>acestreamengine --stream-node</tt>
 
** вместо <tt>acestreamengine-client-console</tt> следует запускать <tt>acestreamengine --client-console</tt>
 
** вместо <tt>acestreamengine-client-gtk</tt> следует запускать <tt>acestreamengine --client-gtk</tt>
 
* изменена система логирования. В старых версия движок всю отладочную информацию выводил в STDERR и для записи логов в файл требовалось перенаправлять вывод. В новой версии можно в опциях задать, куда писать логи - в STDOUT, в STDERR, в файл либо в syslog. Для файлов поддерживается ротация логов по размеру. Описание всех опций смотрите в разделе [[#Команда acestreamengine|Команда acestreamengine]]
 
 
 
===Команда acestreamengine===
 
Начиная с версии 2.1 Ace Stream Engine для Linux представляет собой один исполняемый файл <tt>acestreamengine</tt>, который работает в различных режимах в зависимости от заданных параметров.
 
 
 
Режим работы задается одним из следующих параметров:
 
* <tt>--client-console</tt> - запустить движок в режиме клиента из консоли (без графического интерфейса)
 
* <tt>--client-wx</tt> - запустить движок в режиме клиента с графическим интерфейсом WX
 
* <tt>--client-gtk</tt> - запустить движок в режиме клиента с графическим интерфейсом GTK
 
* <tt>--stream-source</tt> - запустить источник трансляции
 
* <tt>--stream-node</tt> - запустить узел поддержки
 
* <tt>--create-transport</tt> - создать транспортный файл из существующего контента (VOD)
 
* <tt>--create-transport-multi</tt> - создать мультипотоковый транспортный файл
 
* <tt>--version</tt> - показать версию движка
 
 
 
Каждый режим работы имеет свои обязательные и необязательные параметры, описанные в соответствующих разделах.
 
 
 
Также всех режимов работы есть общие параметры, которые управляют выводом отладочной информации.
 
* <tt>--log-stdout</tt> - выводить информацию в STDOUT
 
* <tt>--log-stderr</tt> - выводить информацию в STDERR
 
* <tt>--log-file PATH</tt> - выводить информацию в указанный файл
 
* <tt>--log-max-size SIZE</tt> - максимальный размер файла (в байтах)
 
* <tt>--log-backup-count COUNT</tt> - сколько резервных логов хранить (резервный лог файл создается при достижении лимита, указанного паметром --log-max-size)
 
* <tt>--log-file-buffer SIZE</tt> - включить буферизацию вывода в файл (с использованием буфера указанного размера в байтах)
 
* <tt>--log-syslog HOST</tt> - выводить информацию в syslog-сервер по указанному адресу
 
* <tt>--log-syslog-port PORT</tt> - порт syslog-сервера
 
* <tt>--log-syslog-facility FACILITY</tt> - используемый facility
 
* <tt>--log-syslog-buffer SIZE</tt> - включить буферизацию вывода в syslog (с использованием буфера указанного размера в байтах)
 
  
 
===Common work scheme ===
 
===Common work scheme ===
Line 173: Line 60:
 
The source accepts HTTP-stream to input (at this moment HTTP-streams with MPEG-TS encapsulation are supported) with original broadcast and creates a file with acelive extension after the launch. This file is a unique identifier of broadcast and it is used for connection and playback by clients.
 
The source accepts HTTP-stream to input (at this moment HTTP-streams with MPEG-TS encapsulation are supported) with original broadcast and creates a file with acelive extension after the launch. This file is a unique identifier of broadcast and it is used for connection and playback by clients.
  
===Syntax of acestreamengine-stream command===
+
===Syntax of acestreamengine --stream-source command===
<tt>acestreamengine-stream</tt> command launches broadcast source.
+
<tt>acestreamengine --stream-source</tt> command launches broadcast source.
  
 
''required parameters''
 
''required parameters''
Line 186: Line 73:
 
*<tt>--cache-dir CACHE_DIR</tt> - directory for creating service files (broadcast cache and others)
 
*<tt>--cache-dir CACHE_DIR</tt> - directory for creating service files (broadcast cache and others)
 
*<tt>--publish-dir PUBLISH_DIR</tt> - directory, in which acelive-file will be created
 
*<tt>--publish-dir PUBLISH_DIR</tt> - directory, in which acelive-file will be created
*<tt>--piecesize PIECESIZE</tt> - piece size in bytes (if it's not specified, it's set automatically depending on bitrate)
+
*<tt>--piecesize PIECESIZE</tt> - piece size in bytes, power of two (if it's not specified, it's set automatically depending on bitrate)
 
*<tt>--duration DURATION</tt> - size of broadcast cache in format HH:MM:SS (by default, one hour: 01:00:00)
 
*<tt>--duration DURATION</tt> - size of broadcast cache in format HH:MM:SS (by default, one hour: 01:00:00)
 
*<tt>--host HOST</tt> - set address of local tracker manually
 
*<tt>--host HOST</tt> - set address of local tracker manually
Line 198: Line 85:
 
*<tt>--provider-key PROVIDER_KEY</tt> - provider's key (only for commercial broadcasts)
 
*<tt>--provider-key PROVIDER_KEY</tt> - provider's key (only for commercial broadcasts)
 
*<tt>--maxclients MAXCLIENTS</tt> - maximum number of peers, on which data from the source are given simultaneously
 
*<tt>--maxclients MAXCLIENTS</tt> - maximum number of peers, on which data from the source are given simultaneously
*<tt>--show-pieces</tt> - show in log numbers of pieces as they are created
+
*<tt>--log-debug DEBUG</tt> - set the debug level (default is 0 - minimum log level)
*<tt>--show-peers</tt> - periodically show in log list of connected peers
+
*<tt>--source-read-timeout SECONDS</tt> - timeout for reading data from the original source (in seconds). Default is 30.
*<tt>--debug DEBUG</tt> - set debug level
+
*<tt>--source-reconnect-interval SECONDS</tt> - interval is seconds, after which the engine will try to reconnect to the original source in case of connection lost. Default is 5.
 +
*<tt>--pid-file-dir PATH</tt> - the directory where engine's pid file is created. Default is /tmp.
 +
*<tt>--provider-key</tt> - provider key (for an affiliate program)
 +
*<tt>--sid</tt> - content identificator for statistics(for an affiliate program)
 +
*<tt>--permanent</tt> - mark the broadcast as 24/7 (it's available all the time)
 +
*<tt>--date-start YYYY-MM-DD HH:mm:ss</tt> - set the data and time of the broadcast start (for the broadcasts which runs during a limited time)
 +
*<tt>--date-end YYYY-MM-DD HH:mm:ss</tt> - set the data and time of the broadcast end(for the broadcasts which runs during a limited time)
 +
*<tt>--premium</tt> - request a "premium" status for the broadcast
 +
*<tt>--upload-limit</tt> - limit upload speed (bytes/s, default is 0 - don't limit)
 +
*<tt>--max-connections</tt> - limit total number of connections (default is 1000)
 +
*<tt>--max-peers</tt> - limit number of connections to other peers (default is 50)
 +
*<tt>--service-remote-access</tt> - enable remote statistics
 +
*<tt>--service-access-token</tt> - password for remote statistics access
 +
*<tt>--stats-report-interval</tt> - interval in seconds between internal statistics update (default is 60)
 +
*<tt>--stats-report-peers</tt> - update information about connected peers in the internal statistics (increases CPU load)
  
 
''additional''
 
''additional''
 
*<tt>-h, --help</tt> - show commands' description
 
*<tt>-h, --help</tt> - show commands' description
  
=== Syntax of acestreamengine-node command===
+
=== Syntax of acestreamengine --stream-node command===
<tt>acestreamengine-node</tt> command launches support node.
+
<tt>acestreamengine --stream-node</tt> command launches support node.
  
 
''required parameters''
 
''required parameters''
Line 219: Line 120:
 
*<tt>--allow-support-download</tt> - allow receiving data from other support nodes
 
*<tt>--allow-support-download</tt> - allow receiving data from other support nodes
 
*<tt>--allow-peers-download</tt> - allow receiving data from ordinary peers
 
*<tt>--allow-peers-download</tt> - allow receiving data from ordinary peers
*<tt>--max-incoming-connects MAX_INCOMING_CONNECTS</tt> - maximum number of incoming connections (from other peers) (by default: 1000)
+
*<tt>--max-connections MAX_CONNECTIONS</tt> - limit number of total connections (default is 1000)
*<tt>--max-outgoing-connects MAX_OUTGOING_CONNECTS</tt> - maximum number of outgoing connections (to other peers) (by default: 50)
+
*<tt>--max-peers MAX_PEERS</tt> - limit number of connections to other peers (default is 50)
 
*<tt>--max-upload-slots MAX_UPLOAD_SLOTS</tt> - maximum number of peers, on which data from support node are given simultaneously (by default: 7)
 
*<tt>--max-upload-slots MAX_UPLOAD_SLOTS</tt> - maximum number of peers, on which data from support node are given simultaneously (by default: 7)
 
*<tt>--max-download-speed MAX_DOWNLOAD_SPEED</tt> - maximum download speed (byte/s). By default: 0 (no restrictions).
 
*<tt>--max-download-speed MAX_DOWNLOAD_SPEED</tt> - maximum download speed (byte/s). By default: 0 (no restrictions).
 
*<tt>--max-upload-speed MAX_UPLOAD_SPEED</tt> - maximum upload speed (byte/s). By default: 0 (no restrictions).
 
*<tt>--max-upload-speed MAX_UPLOAD_SPEED</tt> - maximum upload speed (byte/s). By default: 0 (no restrictions).
*<tt>--show-pieces</tt> -show in log numbers of pieces as they are created
+
*<tt>--log-debug DEBUG</tt> - set the debug level (default is 0 - minimum log level)
*<tt>--show-peers</tt> - periodically show in log list of connected peers
+
*<tt>--service-remote-access</tt> - enable remote statistics
*<tt>--stats-report-interval STATS_REPORT_INTERVAL</tt> - set interval in seconds to show in log information about download/upload speep. By default: 0 (do not show).
+
*<tt>--service-access-token</tt> - password for remote statistics access
*<tt>--debug DEBUG</tt> - set debug level
+
*<tt>--stats-report-interval</tt> - interval in seconds between internal statistics update (default is 60)
 +
*<tt>--stats-report-peers</tt> - update information about connected peers in the internal statistics (increases CPU load)
  
 
''additional''
 
''additional''
Line 259: Line 161:
  
 
We launch the source on server 192.168.1.1:
 
We launch the source on server 192.168.1.1:
  <tt>acestreamengine-stream \
+
  <tt>acestreamengine --stream-source \
 
  --name "test" \
 
  --name "test" \
 
  --title "Test broadcast" \
 
  --title "Test broadcast" \
Line 266: Line 168:
 
  --publish-dir "/home/www/streams" \
 
  --publish-dir "/home/www/streams" \
 
  --cache-dir "/tmp/streams" \
 
  --cache-dir "/tmp/streams" \
  --add-authorized-peers \
+
  --add-authorized-peers</tt>
> /tmp/test-source.log 2>&1</tt>
 
  
The last line is used to write logs into file /tmp/test-source.log. <tt>acestreamengine-stream</tt> shows all debug information in console in STDERR.
+
The last line is used to write logs into file /tmp/test-source.log. By default <tt>acestreamengine --stream-source</tt> outputs all debug information in the STDOUT.
  
 
<tt>--add-authorized-peers</tt> option adds the list of authorized nodes to acelive-file (in this case, it's the source: 192.168.1.1).
 
<tt>--add-authorized-peers</tt> option adds the list of authorized nodes to acelive-file (in this case, it's the source: 192.168.1.1).
Line 287: Line 188:
 
In this example we assume that XBT Tracker is installed and launched on server 192.168.1.1.
 
In this example we assume that XBT Tracker is installed and launched on server 192.168.1.1.
 
Now broadcast's launch will look like:
 
Now broadcast's launch will look like:
  <tt>acestreamengine-stream \
+
  <tt>acestreamengine --stream-source \
 
  --name "test" \
 
  --name "test" \
 
  --title "Test broadcast" \
 
  --title "Test broadcast" \
Line 296: Line 197:
 
  --add-authorized-peers \
 
  --add-authorized-peers \
 
  --skip-internal-tracker \
 
  --skip-internal-tracker \
  --tracker "udp://192.168.1.1:2710/announce" \
+
  --tracker "udp://192.168.1.1:2710/announce"</tt>
> /tmp/test-source.log 2>&1</tt>
 
  
 
<tt>--skip-internal-tracker</tt> option disconnects embedded tracker, <tt>--tracker</tt> option connects external tracker.
 
<tt>--skip-internal-tracker</tt> option disconnects embedded tracker, <tt>--tracker</tt> option connects external tracker.
Line 307: Line 207:
 
using <tt>--support-node</tt> option:
 
using <tt>--support-node</tt> option:
  
  <tt>--support-node</tt>:
+
  <tt>acestreamengine --stream-source \
<tt>acestreamengine-stream \
 
 
  --name "test" \
 
  --name "test" \
 
  --title "Test broadcast" \
 
  --title "Test broadcast" \
Line 320: Line 219:
 
  --tracker "udp://192.168.1.1:2710/announce" \
 
  --tracker "udp://192.168.1.1:2710/announce" \
 
  --support-node "192.168.1.2:8621" \
 
  --support-node "192.168.1.2:8621" \
  --support-node "192.168.1.3:8621" \
+
  --support-node "192.168.1.3:8621"</tt>
> /tmp/test-source.log 2>&1</tt>
 
  
 
Launch support nodes on servers 192.168.1.2 and 192.168.1.3 (commands are the same):
 
Launch support nodes on servers 192.168.1.2 and 192.168.1.3 (commands are the same):
  <tt>acestreamengine-node \
+
  <tt>acestreamengine --stream-node \
 
  --url "<nowiki>http://192.168.1.1/streams/test.acelive</nowiki>" \
 
  --url "<nowiki>http://192.168.1.1/streams/test.acelive</nowiki>" \
 
  --state-dir "/tmp" \
 
  --state-dir "/tmp" \
 
  --source-node "192.168.1.1:7764" \
 
  --source-node "192.168.1.1:7764" \
  --allow-source-download \
+
  --allow-source-download</tt>
> /tmp/test-node.log 2>&1</tt>
 
  
 
Option <tt>--source-node</tt> sets source address.
 
Option <tt>--source-node</tt> sets source address.
Line 338: Line 235:
  
 
On server 192.168.1.2 it will look like:
 
On server 192.168.1.2 it will look like:
  <tt>acestreamengine-node \
+
  <tt>acestreamengine --stream-node \
 
  --url "<nowiki>http://192.168.1.1/streams/test.acelive</nowiki>" \
 
  --url "<nowiki>http://192.168.1.1/streams/test.acelive</nowiki>" \
 
  --state-dir "/tmp" \
 
  --state-dir "/tmp" \
Line 344: Line 241:
 
  --allow-source-download \
 
  --allow-source-download \
 
  --support-node "192.168.1.3:8621" \
 
  --support-node "192.168.1.3:8621" \
  --allow-support-download \
+
  --allow-support-download</tt>
> /tmp/test-node.log 2>&1</tt>
 
  
 
On server 192.168.1.3:
 
On server 192.168.1.3:
  <tt>acestreamengine-node \
+
  <tt>acestreamengine --stream-node \
 
  --url "<nowiki>http://192.168.1.1/streams/test.acelive</nowiki>" \
 
  --url "<nowiki>http://192.168.1.1/streams/test.acelive</nowiki>" \
 
  --state-dir "/tmp" \
 
  --state-dir "/tmp" \
Line 354: Line 250:
 
  --allow-source-download \
 
  --allow-source-download \
 
  --support-node "192.168.1.2:8621" \
 
  --support-node "192.168.1.2:8621" \
  --allow-support-download \
+
  --allow-support-download</tt>
> /tmp/test-node.log 2>&1</tt>
 
  
 
====Private source with two support nodes====
 
====Private source with two support nodes====
Line 364: Line 259:
  
 
To make the source private, option <tt>--private-source</tt> must be specified:
 
To make the source private, option <tt>--private-source</tt> must be specified:
  <tt>acestreamengine-stream \
+
  <tt>acestreamengine --stream-source \
 
  --name "test" \
 
  --name "test" \
 
  --title "Test broadcast" \
 
  --title "Test broadcast" \
Line 377: Line 272:
 
  --support-node "192.168.1.2:8621" \
 
  --support-node "192.168.1.2:8621" \
 
  --support-node "192.168.1.3:8621" \
 
  --support-node "192.168.1.3:8621" \
  --private-source \
+
  --private-source</tt>
> /tmp/test-source.log 2>&1</tt>
 
  
 
Notice that in this configuration tracker's address is changed to <tt>udp://192.168.1.2:2710/announce</tt>. It was made to support old versions of clients, which do not process a list of authorized peers (more details here [[#Authorized peers|Authorized peers]]).
 
Notice that in this configuration tracker's address is changed to <tt>udp://192.168.1.2:2710/announce</tt>. It was made to support old versions of clients, which do not process a list of authorized peers (more details here [[#Authorized peers|Authorized peers]]).
 
 
Launch support nodes on servers 192.168.1.2 and 192.168.1.3 as usual:
 
Launch support nodes on servers 192.168.1.2 and 192.168.1.3 as usual:
  <tt>acestreamengine-node \
+
  <tt>acestreamengine --stream-node \
 
  --url "<nowiki>http://192.168.1.1/streams/test.acelive</nowiki>" \
 
  --url "<nowiki>http://192.168.1.1/streams/test.acelive</nowiki>" \
 
  --state-dir "/tmp" \
 
  --state-dir "/tmp" \
 
  --source-node "192.168.1.1:7764" \
 
  --source-node "192.168.1.1:7764" \
  --allow-source-download \
+
  --allow-source-download</tt>
> /tmp/test-node.log 2>&1</tt>
+
 
 +
====Recent scripts and configuration examples====
 +
Python-based launch scripts with configuration examples and some brief explanation available via https://github.com/acestream/streaming-utils

Latest revision as of 14:49, 17 October 2021

Launching broadcast

Main terms

  • Source - a program that accepts broadcast's HTTP-stream and provides playback of broadcast using ACE Stream software.
  • Support node - a program allowing to scale broadcast using additional server equipment and Internet-channels.
  • Client - ACE Stream software, which is used to play broadcast.

Transition from versions 2.0.х to version 2.1 and higher

From September, 10, 2013, upgraded version of the engine (2.1.6) for Ubuntu, Debian and CentOS is available. Before using a new version for production, we recommend to test it on one or several broadcasts, if possible. If you face any problems, please, write to the forum (https://forum.acestream.media/latest) or email 'support@acestream.net'.

ATTENTION! In the nearest future support for older versions will be stopped.

IMPORTANT! All broadcasts created via new version of Ace Stream (2.1 and higher) are not suppported by client software of old versions (2.0.х and lower). If you attempt to watch a new broadcast using the old engine, an error "Cannot load transport file" will appear.

Changes in launch parameters

Some parameters of the launch of sources and support nodes from the command line have been changed, therefore the launch with the old command line will not work.

Main changes:

  • one executable file is used acestreamengine; different launch modes (a source, support node) are set by options:
    • instead of acestreamengine-stream you should launch acestreamengine --stream-source
    • instead of acestreamengine-node you should launch acestreamengine --stream-node
    • instead of acestreamengine-client-console you should launch acestreamengine --client-console
    • instead of acestreamengine-client-gtk you should launch acestreamengine --client-gtk
  • log system is changed. In old versions the engine output all debug information into STDERR and redirecting the output was required to write logs into a file. In a new version it is possible to define in options, where to write logs - into STDOUT, into STDERR, into a file or syslog. Rotation of logs by their size is supported for files. You can read description of all options in acestreamengine command

Transition from versions 2.1.х to version 3.0.x and higher

See main article about Ace Stream v.3 - https://wiki.acestream.media/AceStream_3.0/en

acestreamengine command

Starting from version 2.1 Ace Stream Engine for Linux represents a single executable file acestreamengine, which works in different modes, depending on specified parameters.

Work mode is set by one of the following parameters:

  • --client-console - launch engine in a client mode from console (without a graphic interface)
  • --client-wx - launch engine in a client mode with a graphic interface WX
  • --client-gtk - launch engine in a client mode with a graphic interface GTK
  • --stream-source - launch a source of broadcast
  • --stream-node - launch a support node
  • --create-transport - create a transport file from existing content (VOD)
  • --create-transport-multi - create a multi-stream transport file
  • --version - show engine version

Each work mode has their own required and not required parameters, described in appropriate sections.

Also all work modes have common parameters that manage the output of debug information.

  • --log-stdout - deduce information in STDOUT
  • --log-stderr - deduce information in STDERR
  • --log-file PATH - deduce information in a specified file
  • --log-max-size SIZE - maximum file size (bytes)
  • --log-backup-count COUNT - how many backup logs have to be stored (backup log file is created when a limit, specified by a parameter --log-max-size, is reached)
  • --log-file-buffer SIZE - enable buffering of output into the file (using buffer of specified size in bytes)
  • --log-syslog HOST - deduce information in syslog-server at the specified address
  • --log-syslog-port PORT - syslog-server port
  • --log-syslog-facility FACILITY - used facility
  • --log-syslog-buffer SIZE - enable buffering of output into syslog (using buffer of specified size in bytes)

Common work scheme

Broadcast organization starts from launching the source (command acestreamengine-stream). The source accepts HTTP-stream to input (at this moment HTTP-streams with MPEG-TS encapsulation are supported) with original broadcast and creates a file with acelive extension after the launch. This file is a unique identifier of broadcast and it is used for connection and playback by clients.

Syntax of acestreamengine --stream-source command

acestreamengine --stream-source command launches broadcast source.

required parameters

  • --name NAME - broadcast name (this name is used when creating acelive and other service files)
  • --source SOURCE - source (link to http-stream)
  • --bitrate BITRATE - average bitrate of stream in bytes per second

optional parameters

  • --title TITLE - "readable" broadcast name (this name is shown to clients). If it's not specified, it's taken from --name
  • --destdir DESTDIR - old parameter, it's better to use --cache-dir and --publish-dir
  • --cache-dir CACHE_DIR - directory for creating service files (broadcast cache and others)
  • --publish-dir PUBLISH_DIR - directory, in which acelive-file will be created
  • --piecesize PIECESIZE - piece size in bytes, power of two (if it's not specified, it's set automatically depending on bitrate)
  • --duration DURATION - size of broadcast cache in format HH:MM:SS (by default, one hour: 01:00:00)
  • --host HOST - set address of local tracker manually
  • --port PORT - port, where the engine works
  • --skip-internal-tracker - disable local tracker
  • --add-authorized-peers - add list of authorized peers to acelive file
  • --private-source - make the source private
  • --support-node SUPPORT_NODE - add support node (in format ip:port). This parameter may appear multiple times if several support nodes have to be added.
  • --tracker TRACKER - add tracker(announce url). This parameter may appear multiple times.
  • --trackers TRACKERS - old format for adding trackers (announce url list separated by commas)
  • --provider-key PROVIDER_KEY - provider's key (only for commercial broadcasts)
  • --maxclients MAXCLIENTS - maximum number of peers, on which data from the source are given simultaneously
  • --log-debug DEBUG - set the debug level (default is 0 - minimum log level)
  • --source-read-timeout SECONDS - timeout for reading data from the original source (in seconds). Default is 30.
  • --source-reconnect-interval SECONDS - interval is seconds, after which the engine will try to reconnect to the original source in case of connection lost. Default is 5.
  • --pid-file-dir PATH - the directory where engine's pid file is created. Default is /tmp.
  • --provider-key - provider key (for an affiliate program)
  • --sid - content identificator for statistics(for an affiliate program)
  • --permanent - mark the broadcast as 24/7 (it's available all the time)
  • --date-start YYYY-MM-DD HH:mm:ss - set the data and time of the broadcast start (for the broadcasts which runs during a limited time)
  • --date-end YYYY-MM-DD HH:mm:ss - set the data and time of the broadcast end(for the broadcasts which runs during a limited time)
  • --premium - request a "premium" status for the broadcast
  • --upload-limit - limit upload speed (bytes/s, default is 0 - don't limit)
  • --max-connections - limit total number of connections (default is 1000)
  • --max-peers - limit number of connections to other peers (default is 50)
  • --service-remote-access - enable remote statistics
  • --service-access-token - password for remote statistics access
  • --stats-report-interval - interval in seconds between internal statistics update (default is 60)
  • --stats-report-peers - update information about connected peers in the internal statistics (increases CPU load)

additional

  • -h, --help - show commands' description

Syntax of acestreamengine --stream-node command

acestreamengine --stream-node command launches support node.

required parameters

  • --url URL> - link to acelive file of broadcast

optional parameters

  • --port PORT - port(by default: 8621)
  • --state-dir STATE_DIR - directory for temporary files (it's deleted after support node installation)
  • --source-node SOURCE_NODE - address of broadcast source (ip:port)
  • --support-node SUPPORT_NODE - add address of another support node (ip:port). This parameter may appear multiple times.
  • --allow-source-download - allow receiving data from the source
  • --allow-support-download - allow receiving data from other support nodes
  • --allow-peers-download - allow receiving data from ordinary peers
  • --max-connections MAX_CONNECTIONS - limit number of total connections (default is 1000)
  • --max-peers MAX_PEERS - limit number of connections to other peers (default is 50)
  • --max-upload-slots MAX_UPLOAD_SLOTS - maximum number of peers, on which data from support node are given simultaneously (by default: 7)
  • --max-download-speed MAX_DOWNLOAD_SPEED - maximum download speed (byte/s). By default: 0 (no restrictions).
  • --max-upload-speed MAX_UPLOAD_SPEED - maximum upload speed (byte/s). By default: 0 (no restrictions).
  • --log-debug DEBUG - set the debug level (default is 0 - minimum log level)
  • --service-remote-access - enable remote statistics
  • --service-access-token - password for remote statistics access
  • --stats-report-interval - interval in seconds between internal statistics update (default is 60)
  • --stats-report-peers - update information about connected peers in the internal statistics (increases CPU load)

additional

  • -h, --help - show commands' description

Embedded tracker

Embedded tracker is a tracker embedded into broadcast source. If it's not disabled by --skip-internal-tracker option, its address will be added to acelive-file automatically.

When organizing broadcast with many users, we recommend to disable embedded tracker and replace it with external tracker with a good productivity (for example, XBT Tracker).

Authorized nodes

Client have to establish connection with at least two other nodes or an authorized node, to be connected to broadcast and start playback. Authorized node is a node, which was marked by broadcast's creator as a "trustworthy". Usually it's a broadcast source and/or support nodes.

The latest versions of ACE Stream software support using list of authorized nodes in acelive-file. For this --add-authorized-peers option is set when creating broadcast, after this the list of authorized nodes is created and added to acelive-file. Broadcast source (if it's not private) and all specified support nodes are in the list of authorized nodes. Clients that received this acelive-file use the list to determine whether a node is authorized.

If the list of authorized nodes was not added to acelive-file or an old version of ACE Stream, which doesn't understand this list, is installed, then authorized node is a node, IP address of which matches address of the first tracker from trackers' list. If embedded tracker is enabled on the source, it will be the first one on the list and clients will consider the source as authorized node. If embedded tracker is disabled, to support other clients we recommend to put on the first place tracker, located on the same server as broadcast source (so addresses of the first tracker and the source matched) or use at least one support node (so clients, when starting broadcast, could connect to two peers simultaneously, even if nobody watches broadcast).

Examples

For examples let's assume that there is a local network with three servers:

  • 192.168.1.1 - server for the source
  • 192.168.1.2 - server for support node
  • 192.168.1.3 - server for support node
  • 192.168.1.100 - server that gives original broadcast's stream (HTTP MPEG-TS) at http://192.168.1.100/stream (average bitrate of stream - 300 000 byte/s)

It's assumed that on server 192.168.1.1 there is a web-server with a core directory /home/www and two other directories:

  • /home/www/streams - for keeping acelive-files, which will be available for downloading by a link like http://192.168.1.1/streams/test.acelive
  • /tmp/streams - for keeping cache and service files of broadcast

Source with embedded tracker

This is the easiest way to launch broadcast that does not require launching support nodes and installing additional trackers. This method is suitable for broadcasts with a small number of users.

We launch the source on server 192.168.1.1:

acestreamengine --stream-source \
--name "test" \
--title "Test broadcast" \
--source "http://192.168.1.100/stream" \
--bitrate 300000 \
--publish-dir "/home/www/streams" \
--cache-dir "/tmp/streams" \
--add-authorized-peers

The last line is used to write logs into file /tmp/test-source.log. By default acestreamengine --stream-source outputs all debug information in the STDOUT.

--add-authorized-peers option adds the list of authorized nodes to acelive-file (in this case, it's the source: 192.168.1.1).

After broadcast's launch a file test.acelive will be created in directory /home/www/streams, in directory /tmp/streams such files will be created:

  • test - broadcast cache. This file's size is approximately equal to stream_duration_in_seconds (--duration option, by default: 1 hour) * bitrate byte
  • test.restart - information for correct restart of broadcast is kept here
  • test.sauth - key for a broadcast's digital signature

To watch broadcasts clients can download broadcast file at http://192.168.1.1/streams/test.acelive and start it in ACE Stream player or use other ways (Ways to watch broadcasts).

Source with external tracker

If broadcast involves a large number of users, it's better to use external tracker and disable embedded one (to reduce burden on the source).

We recommed to use XBT Tracker as external tracker.

In this example we assume that XBT Tracker is installed and launched on server 192.168.1.1. Now broadcast's launch will look like:

acestreamengine --stream-source \
--name "test" \
--title "Test broadcast" \
--source "http://192.168.1.100/stream" \
--bitrate 300000 \
--publish-dir "/home/www/streams" \
--cache-dir "/tmp/streams" \
--add-authorized-peers \
--skip-internal-tracker \
--tracker "udp://192.168.1.1:2710/announce"

--skip-internal-tracker option disconnects embedded tracker, --tracker option connects external tracker.

Source with two support nodes

If there is not enough upstream bandwidth for normal work of broadcast on the source, support nodes can be used. Support node is often a node that receives data from the source and gives to clients (though support node can also receive data from other support nodes and even clients, depending on its settings). It makes sense to install support node on a separate server with a good width of output channel.

To make a scheme with support nodes work with maximum efficiency, addresses of these nodes must be given to the source using --support-node option:

acestreamengine --stream-source \
--name "test" \
--title "Test broadcast" \
--source "http://192.168.1.100/stream" \
--bitrate 300000 \
--port 7764 \
--publish-dir "/home/www/streams" \
--cache-dir "/tmp/streams" \
--add-authorized-peers \
--skip-internal-tracker \
--tracker "udp://192.168.1.1:2710/announce" \
--support-node "192.168.1.2:8621" \
--support-node "192.168.1.3:8621"

Launch support nodes on servers 192.168.1.2 and 192.168.1.3 (commands are the same):

acestreamengine --stream-node \
--url "http://192.168.1.1/streams/test.acelive" \
--state-dir "/tmp" \
--source-node "192.168.1.1:7764" \
--allow-source-download

Option --source-node sets source address.

Option --allow-source-download allows support node to download data from the source (downloading from other support nodes and clients in this case is forbidden).

To allow support nodes to download data from other suppport nodes, you should set a list of other nodes using --support-node option and allow downloading using --allow-support-download option.

On server 192.168.1.2 it will look like:

acestreamengine --stream-node \
--url "http://192.168.1.1/streams/test.acelive" \
--state-dir "/tmp" \
--source-node "192.168.1.1:7764" \
--allow-source-download \
--support-node "192.168.1.3:8621" \
--allow-support-download

On server 192.168.1.3:

acestreamengine --stream-node \
--url "http://192.168.1.1/streams/test.acelive" \
--state-dir "/tmp" \
--source-node "192.168.1.1:7764" \
--allow-source-download \
--support-node "192.168.1.2:8621" \
--allow-support-download

Private source with two support nodes

Sometimes it may be necessary to prevent clients from direct access to broadcast source. For example, the source may be located on server in protected area without access from the outer world. In this case broadcast can be organized by the following scheme:

  • the source is made private (only support nodes, specified explicitly, can receive data from it)
  • support nodes receive data from the source and give to clients
  • clients receive data from support nodes

To make the source private, option --private-source must be specified:

acestreamengine --stream-source \
--name "test" \
--title "Test broadcast" \
--source "http://192.168.1.100/stream" \
--bitrate 300000 \
--port 7764 \
--publish-dir "/home/www/streams" \
--cache-dir "/tmp/streams" \
--add-authorized-peers \
--skip-internal-tracker \
--tracker "udp://192.168.1.2:2710/announce" \
--support-node "192.168.1.2:8621" \
--support-node "192.168.1.3:8621" \
--private-source

Notice that in this configuration tracker's address is changed to udp://192.168.1.2:2710/announce. It was made to support old versions of clients, which do not process a list of authorized peers (more details here Authorized peers). Launch support nodes on servers 192.168.1.2 and 192.168.1.3 as usual:

acestreamengine --stream-node \
--url "http://192.168.1.1/streams/test.acelive" \
--state-dir "/tmp" \
--source-node "192.168.1.1:7764" \
--allow-source-download

Recent scripts and configuration examples

Python-based launch scripts with configuration examples and some brief explanation available via https://github.com/acestream/streaming-utils